not processing Scanning the font means the scanning (Page 71 / 76) RDWorks V8 Laser Engraving Cutting Software User Manual

Laser Engraving Cutting Software User Manual----RDCAM V8.0

not processing.

Scanning the font means the scanning part is font, and also called Yin engraving.

Scanning the bottom means the scanning part is bottom, and also called Yang engraving.

Notice: when choose the slope effect, pleas choose not processing in Font Bold, otherwise, the

ramp effects will be influenced.

Font Yin engraving: no frame with the text, scanning the text, as below:

Font Yang carved: frame with the text, scanning the bottom of the graphics, as below:

Scanning mode: horizontal one way, horizontal two-way, vertical one-way, vertical two-way.

Horizontal one way: the laser head scans the graphics back and forth in the horizontal

direction, but only emitting laser when in one direction, such as: when the laser head emits laser

when scanning from right to left, but no laser from left to right.

Horizontal two-way: the laser head scans graphics back and forth in the horizontal direction.

The vertical one way: the laser head scans the graphics back and forth in the vertical direction,

but only emitting laser when in one direction, such as: when the laser head emits laser when

scanning from up to down, but no laser from down to up.

The vertical two-way: the laser head scans graphics back and forth in the vertical direction.

Note: Generally use horizontal two-way scanning mode.

Scanning interval: the distance between the laser head scans this line to the next line. The

smaller the interval, the deeper scanning graphics; conversely, the lighter scanning.

Suggestions: (1) For vector layer (i.e. color layer), scanning interval is below 0.1 mm

(2)For a bitmap layer (i.e. BMP layer), scanning interval is above 0.1 mm

Then change the max. & min. power, and make the graphics depth achieving the ideal effect.

71 / 76